The steps to creating Embroidered Iron on Patches

 

There was a period of time when embroidered iron on patches were utilised to primarily conceal holes which might have happened on a dress. But with a little bit of versatility and creative thinking you can work with this patch and add an element of spunk and flair to any outfit which you opt for. It’s not simply clothes where you can use these patches but these embroidered iron on patches can be used to liven up bags, shoes, pillows, upholstery, hat’s�the list can be as limitless as your imagination.

If you wish to produce tailored patches then you could conveniently build-it-yourself. You can obtain most of the resources that you need to have quickly at stores where you could obtain premade patches. The greatest advantage of using an iron on patch is that you can invest all the time you want to in producing them but have to spend very little time attaching them.

You’ve got to have your materials in place just before you start making your patch. But before you’ll get your resources think about the style and design of the patch that you would like to create. Once you’ve the design made to size you must sketch or trace precisely the same on the cloth. Make certain you don’t embroider the design onto the cloth without the hoop so that the executed pattern comes out flat. Now place a tear away backing sheet on the wrong side of the patch and connect the embroidery ring in position in order that the design is tight. You may even use some backing spray to fix your backing paper in place.

You can now start out embroidering your iron on patch. Ensure that your thread is no longer than two feet at some point for you to embroider easily and don’t need to work with unwanted tangles and knots. Now embroider along the design ensuring that you start out each length of the thread from the back of the design so the knots or extra lengths don’t show up in front of the structure.

 

Once you have finished embroidering your patch take it out of the hoop and take away the backing paper by tearing it off lightly. Try taking a little iron on sticky paper and cut it to the same size of your patch. Now put your patch face down upon an ironing board and set the iron on adhesive patch glue side down on your patch. Get a clean section of cloth or paper towel on top of the sheet. Put your iron on the low setting and iron the adhesive on the patch. You can even make use of the silk setting on your iron. The paper towel or rag will make sure that not one of the glue gets ensnared to your iron.

Your embroidered iron on patches will be ready to use once you complete this phase. Now all you need to carry out is peel off the paper backing the adhesive right behind the patch, put it where you choose to place it and iron it tightly into position. Iron the cloth inside out so that the adhesive gets appropriately activated and maintains the patch in place.